The Operation Method Of Insulating Tape

The operation method of insulating tape

In the process of using electricity, although people have noticed that the size of the cross-sectional area of the power cord material has an impact on the safe use of electricity, they often pay insufficient attention to the use of insulating tape for connectors. The laying of power lines is becoming more and more complicated, all under wooden floors, in walls, in partitions, and in wet underground or water. If the insulation polyester mylar tape is used improperly, electrical leakage will occur and endanger personal safety. Therefore, we must use insulation tape correctly. The power cord connector is divided into "+" word connection method, "-" word connection method, "T" word connection method and so on. The connector should be entangled, smooth and free of burrs. Otherwise, before the wire head is disconnected, it should be pressed gently with wire pliers, and then wound around the pressure port, and then swing left and right, the wire head will be cut off at the joint very comfortably. If the joint is in a dry place, firstly wrap two layers of insulating black tape, then wrap two layers of plastic tape, and then stretch about 200% with insulating self-adhesive tape, wrap two to three layers, and finally wrap two layers of plastic tape.