banner
Contact Us

TEL: +86-755-29764456
FAX: +86-592-7152858
E-mail: inquiry-tape@winnewtech.com
Address: Building 2, Hongqiaotou Industrial Zone, Songgang, Baoan, Shenzhen, China. 518127
Home > Industry Info > Content

What Is Heat Transfer Tape?

Jul 05, 2021

Heat Transfer Tape, also known as thermally conductive double-sided tape, has high thermal conductivity, high viscosity, and low thermal resistance. It can effectively replace thermal paste and mechanical fixation characteristics and is used to fill the uneven gap between the heat source and the metal product. Take away the heat generated by electronic products to achieve the effect of cooling and heat dissipation.


Among them, Heat transfer tape can be divided into substrates and non-substrates. The common compositions are pressure-sensitive adhesives with acrylic as the base and silicone as the base. Acrylic is the base material, which is suitable for porcelain and metal interfaces, while the silicone base material is a thermally conductive tape, which is often used for plastic contact surfaces. In addition, the common reinforcing material of thermally conductive tape is glass fiber or Polyimide to increase stiffness and withstand voltage.


Heat transfer tape is often used to adhere to small or elongated electronic components. Because of its thermal conductivity and adhesive functions, it is suitable for small chips on computer motherboards, small heat sinks for image display cards, or backlight module panels, etc.


Early chips do not require heat dissipation devices, and the performance of electronic products continues to improve and the size is relatively reduced. The demand for heat dissipation is increasing day by day, so small heat dissipation fins are used, which is also one of the most commonly used applications of heat transfer tape.


How to use thermal tape:

1. Measure out the required area first, and cut according to its length and width.

2. Then tear off the film, and stick it between the heat-generating product and the heat sink as smoothly as possible.

3. If the matching heat sink is large and heavy, it is recommended to use a fixing frame before the glue is applied to prevent the heat sink from falling off.


Where can thermal tape be applied?

Product characteristics: Good adhesion and thermal conductivity, easy to operate.

Uses LED lights, backlight modules, IC, and other products.


Advantages of heat transfer tape:

1. It is used to connect the LED chip and the heat sink with convenient operation, which solves the problem of difficult operation of thermal paste, uneven application, and defective products caused by the overflow of glue.

2. It can replace screws, fasteners, and other fixing methods.

Previous: What Does A Thermal Pad Do?

Next: What Is Foam Tape?