banner
Contact Us

TEL: +86-755-29764456
FAX: +86-592-7152858
E-mail: inquiry-tape@winnewtech.com
Address: Building 2, Hongqiaotou Industrial Zone, Songgang, Baoan, Shenzhen, China. 518127
Home > Industry Info > Content

Double-Sided Pet Adhesive - Understands the Method

Jul 30, 2021

Is PET tape a good option for sealing rolls or sealing plastic sheets? It is an excellent solution for sealing large sheet products such as tiles, cement, sheet metal, and so on. There are some advantages of using this brand over other tapes. To understand these advantages, let's have a look at the various types of PET tape available in the market.


First of all, what is double-sided pet tape? The answer is simple. It is a tape that is prepared by coating one side of the tape with an anti-adhesive substance and another side with a substrate. This type of tape has the ability to maintain its adhesive properties even after it is exposed to the elements (i.e. temperature, moisture, etc).


As mentioned earlier, double-sided pet tape can be prepared either with an acrylic adhesive or without an adhesive. However, the two backing properties provide different results. As mentioned earlier, the adhesive provides a strong and durable bond. However, the lack of an adhesive allows the product to be more flexible. For instance, if you need to stick a big-sized item into a smaller one (or vice versa), you can do so without any difficulty. In addition, you can use multiple layers without any problem.


On the contrary, if you use double-sided pet tape without any adhesive, the tape will become more pliable and less rigid. But the opposite is also true. When the adhesive is applied, it seals the initial tack between the two sheets. But then, the plastic sheet can absorb the pressure generated due to the adhesive.


Thus, the best way to mount items on the board is to prepare the surface on which you will mount the item, coat the board with acyl alcohol, place the required materials on the mounting surface, and then roll the double-sided pet tape. If you do not want the paper to dry out, you can wrap it with enamel alcohol before sealing it. But again, be careful not to press too hard. Start mounting the item on the board from one end and then slowly roll it towards the other end. Just make sure that you have a long and straight path for the nameplate to rest upon. But make sure that the nameplates are flush against the face of the board.


When it comes to mounting items onto the board, using a solvent acrylic adhesive is the best method. Make sure that you apply the solvent-based adhesive evenly on the face of the board. Then, just slide the nameplate onto the mounting stand and slide it in a direction so that it rests smoothly against the face of the stand. Finally, just tape everything down, but be sure that it is taped neatly in such a way that it can be removed easily if you want to replace the transparent cover.

Previous: Heat Sink Tape - What Are They?

Next: Ultra-Thin Tape Review