Waxing is usually done with solid wax. When waxing on ceramic tile, especially archaize brick, the requirement to waxing is particularly tall. Therefore, must assure the wax on ceramic tile is thin and thick even, but cannot flow into resolutely in the aperture. The second day after construction, wait for the material to dry, and then knock the wax out.
Stick crepe paper is the selection of special construction paper tape, before the construction of the gap on both sides, to ensure that paste neat, level. After construction, tear up the crepe paper directly and clean it up.
Wax compared to stick crepe paper
(1) waxing needs to be done again the next day, which will delay the work hours;
(2) waxing must be uniform, wax hit less or did not hit the place is not easy to shovel off if the wax is not careful to get wax into the seam, the United States seam viscosity will be reduced, not firm, may fall off;
(3) when shovel seam still has the possibility that can destroy ceramic tile, shovel knife is the sharp object, want to touch the ceramic tile to have Nick only, even if be slight Nick, the industry also often has the case that delimits broken ceramic tile to compensate;
(4) crepe paper can avoid the above deficiencies. After sewing on the same day, you can tear the paper, and you don't have to shovel the sewing at the delay of the next day.
(5) the adhesive paper is more professional in construction, and the nano-ceramic clay is more viscous, which is not easy to fall off after drying, and the paste crepe paper can avoid residual materials.
In contrast, when the construction of the United States seam stick crepe paper more labor-saving, more professional, convenient construction, the most important is, can maximize the protection of ceramic tile. Therefore, stick crepe paper is the best choice when sewing.
